Vulcan-materials C24EA10 User Manual download pdf (Page 4)

— 4 —

C24EA SERIES ELECTRIC CONVECTION STEAMERS

LOCATION

Allow space for plumbing and electrical

connections. Minimum clearance is 6" (15.2 cm)

on the back for proper air circulation. Allow

adequate access for operating and servicing the

steamer: 36" (91.4 cm) at the front of the steamer,

15" (38 cm) above the steamer and 18" (45.7 cm)

on the right and left sides of the steamer.

LEVELING AND ANCHORING

Position the steamer in its final installed location.

Place a level on the horizontal area of the

cabinet. Adjust the feet to level the steamer in

both the left-to-right and front-to-rear directions.

Steamers should be elevated in the front just

enough, about

/16" to

/8" (2 to 3 mm), to

provide proper draining. Do this by rotating the

adjustable feet in the proper direction 1 to 1

turns after leveling. Check drainage in the

steamer compartments by pouring a small

amount of water in the compartment. All the

water should drain.

The feet have holes in the flanges for anchor bolts.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Vulcan-materials C24EA10 User Manual Page 4